| Quantity: | |
|---|---|
The 1/2" Industrial Carbide Finger Grip Bit for Drawer is a heavy-duty router bit engineered for creating ergonomic finger pulls in drawer fronts, cabinet doors, and furniture panels. Crafted from industrial-grade carbide (C3 grade) brazed to a heat-treated 4140 steel shank, it combines wear resistance with structural rigidity for high-volume production. Featuring a 1-3/8" cutting diameter and a 1/2" shank—ideal for minimizing vibration in router tables—its unique finger grip profile (rounded edges, recessed center) ensures comfortable handling while reducing splintering in delicate materials. Ideal for professional woodworkers, cabinet shops, and furniture factories, this bit delivers consistent results in hardwoods, MDF, particleboard, and laminate-covered surfaces.
Parameter | Details |
Material | Carbide-tipped (C3 grade) with heat-treated steel shank |
Cutting Diameter | 1-3/8" (creates 1/2" deep finger pulls) |
Shank Diameter | 1/2" (stabilizes heavy-duty routing operations) |
Max RPM | 18,000 (optimized for router tables) |
Bearing Guide | 1/2" diameter (ensures uniform depth control) |
Coating | Titanium carbonitride (TiCN) for anti-corrosion and reduced friction |
Ergonomic Design: Rounded edges (1/8" radius) and recessed center (1/2" depth) provide a comfortable grip for daily use, reducing user fatigue compared to sharp-edged pulls.
Heavy-Duty Construction: Carbide-tipped cutting edges resist wear in high-volume production (up to 5,000 pulls per sharpening), while the heat-treated steel shank prevents bending under pressure.
Bearing-Guided Precision: ABEC-5 rated bearing maintains ±0.005" depth accuracy across multiple workpieces, ensuring consistent pull dimensions in batch production.
Anti-Kickback Geometry: Reduced 10° cutting angle minimizes sudden torque spikes, enhancing operator safety during table-mounted routing operations.
Wide Compatibility: Fits industrial routers including Festool OF 1400, Milwaukee 5625-20, Bosch 1617EVSPK, and Dewalt DW618.
Drawer Fronts: Creates functional finger pulls in kitchen cabinet drawers, bathroom vanity drawers, and office storage cabinets, eliminating the need for hardware.
Cabinet Doors: Forms recessed handles for contemporary wardrobe doors, pantry doors, and linen closet doors, complementing minimalist design aesthetics.
Industrial Joinery: Used in mass production facilities for furniture destined for hotels, restaurants, and retail stores, ensuring consistent quality across large orders.
Custom Woodworking: Ideal for high-end furniture designers seeking clean, hardware-free aesthetics in custom pieces like credenzas, dressers, and media consoles.
Q: Can this bit cut through laminate-covered particleboard without delamination?
A: Yes, but use a slower feed rate (40–60 IPM) and a sacrificial backer board to support the laminate from below, preventing edge peeling.
Q: How do I adjust the depth of the finger pull to match my project needs?
A: The bearing guide sets the depth automatically (1/2" standard), but you can add shims between the bearing and bit to reduce depth in 1/16" increments for shallower pulls.
Q: Is the bearing replaceable if it wears out, or do I need to replace the entire bit?
A: The bearing is replaceable—spare 1/2" OD shielded bearings are sold separately, allowing easy maintenance to extend the bit’s functional life.
 |  |  |  |
